When we handle efflorescence removal for brick in Affton, MO, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. With brick, the right approach is low-pressure wash.
Method and pressure
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Cleaning brick safely
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Is it time for efflorescence removal for brick?
- White powder or crust on brick, block or pavers
- Haze that comes back after rain
- White lines along mortar joints
What causes the dirt and stains
- Water moving through masonry and carrying salts to the surface
- New pavers and concrete still curing
- Downspouts and sprinklers soaking the masonry
What you can do yourself
- Brush dry efflorescence off with a stiff brush before wetting it
- Fix water sources such as gutters and sprinklers
- Wait out new installations: efflorescence on new pavers often fades on its own
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Washing with plain water, which can dissolve salts and redeposit them
- Strong acids that burn masonry
- Sealing over efflorescence, which traps it
What happens on the day
- Find the moisture source
- Dry-brush loose salts
- Apply an efflorescence cleaner
- Rinse and neutralize
- Seal only once the surface is clean and dry
How much does efflorescence removal for brick cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Serving Affton, MO and nearby towns
Rust from sprinklers and fertilizer, leaf tannin stains in the fall, and salt residue in the spring are the most common stains on Missouri driveways and walkways.
Crews serve all of Affton (ZIP codes 63123, 63125 and 63126), plus Marlborough (1.4 mi), Green Park (1.9 mi), Concord (2.2 mi) and Crestwood (2.7 mi). Call (555) 010-0000 for a free quote in Affton.
Efflorescence Removal for Brick: frequently asked questions
How much does efflorescence removal for brick cost in Affton, MO?
Efflorescence Removal for Brick typically costs $200-$600 for a typical wall, patio or walkway, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for efflorescence removal for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is efflorescence removal for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule efflorescence removal for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.